| The following clauses are to the latest revision: |
| Clause |
Title |
Archive Date |
| QAC-01 |
Quality Preamble |
|
| QC01-N |
Material Identification, Damage & Count |
|
| QC01a |
Material Identification, Damage & Count |
|
| QC02-N |
Certificate of Compliance (C of C) |
|
| QC02a |
Mars Science Laboratory (MSL) Records Retention |
|
| QC03 |
Certification of Compliance for Spare Parts |
|
| QC04 |
Certification to JPL's Specification Requirements |
|
| QC05 |
Supplier Designed Drawing Request (For Commercial and Commercial Off-The-Shelf [COTS] Hardware Only) |
|
| QC06-N |
Certification of Compliance (C of C) for Raw Materials/Specific Lots |
|
| QC06a |
Traceability - Raw Materials |
|
| QC07-N |
Electrical Wire and Cable Test Report |
|
| QC08-N |
Certificate of Compliance (C of C) - Calibration |
|
| QC09-N |
Pressure Vessel |
|
| QC10 |
Flight O-Ring Requirements |
|
| QC100-S |
SOFTWARE DELIVERY DOCUMENTATION |
Jan 22, 2009 |
| QC101-S |
CONTROL OF TEST SOFTWARE |
Jan 22, 2009 |
| QC102-S |
CONTRACTOR SOFTWARE QUALITY MANAGEMENT SYSTEM |
Jan 22, 2009 |
| QC104 |
OPTICAL PROCUREMENT REQUIREMENTS |
Oct 02, 2009 |
| QC104a |
Optics Data and Test Report |
|
| QC105 |
Prohibited Materials |
Sep 12, 2009 |
| QC105a |
Prohibited Materials |
|
| QC106 |
Electrical, Electronic, And Electromechanical (EEE) Part Traceability |
|
| QC107 |
Prohibited Materials |
Sep 12, 2009 |
| QC108 |
Tin Interconnect Materials |
Sep 12, 2009 |
| QC108a |
Tin Interconnect Materials |
|
| QC109 |
Export Control |
May 07, 2009 |
| QC11-N |
High Strength Fastener Requirements |
|
| QC110 |
Bearing Distributor Requirements |
|
| QC111 |
Optical Procurement Requirements |
|
| QC112 |
Prohibited Material Suppliers |
|
| QC12-N |
Limited Life and Age Controlled (Shelf Life) Items |
Dec 30, 2008 |
| QC12a-N |
LIMITED LIFE AND AGE CONTROLLED (SHELF LIFE) ITEMS |
|
| QC13 |
Evidence of Functional Test |
|
| QC14-N |
Nondestructive Inspection (NDI) / Nondestructive Test (NDT) Certification |
|
| QC14a |
JPL's Review of Radiographic Film (NDT) Reports |
|
| QC15-N |
Critical Process Certification |
|
| QC15a |
Use of Certified Critical Processor (CCP) From JPL’s ASL |
|
| QC16 |
Process Procedures (for non ISO system suppliers) |
|
| QC17 |
Supplier (Sub-Tier) Process Controls |
|
| QC18-N |
Flow Down Requirements |
|
| QC19-N |
Change Control Authority |
|
| QC20-N |
First Article Inspection |
|
| QC20a-N |
Delivery of First Article Inspection Records |
|
| QC20b-N |
Retention of First Article |
|
| QC20c-N |
Delivery of First Article |
|
| QC20d |
Source Inspection of First Article |
|
| QC21 |
General Inspection of Received Sub-Components and Sub-Assemblies |
|
| QC21a-N |
Inspection and Test General Clause |
|
| QC22 |
Objective Evidence of Dimensional Inspection |
|
| QC23 |
Acceptance Test Procedure Delivery For Approval |
|
| QC24 |
Qualification Test Procedure |
|
| QC25 |
Metals Control; Sheet, Tube, Rolled, Wire or Other Fabrication |
|
| QC25a |
Weld Filler Metal Control |
|
| QC27 |
Software Quality Assurance |
Jan 22, 2009 |
| QC28-N |
Limited Operating Life Items |
|
| QC29-N |
Quality Records Retention |
|
| QC30A |
CONFIGURATION CONTROL, PRE-SUBMIT REQUIREMENT: |
|
| QC31-N |
EEE Single Lot/Date Code |
|
| QC31a-N |
EEE Parts Date of Manufacture |
|
| QC32 |
Acceptance Data Package |
|
| QC32a |
End Item Data Package-Deliverables to Accompany PWB |
|
| QC33 |
Acceptance Data Pack - Critical Hardware |
|
| QC34-N |
Packaging Requirements |
|
| QC35-N |
Electrostatic Discharge Protection (ESD) Program and Packaging |
Dec 30, 2008 |
| QC35a-N |
ELECTROSTATIC DISCHARGE (ESD) CONTROL PROGRAM |
|
| QC36 |
Solvent Containers |
|
| QC37 |
MANUFACTURING PLANNING |
|
| QC38 |
PYROTECHNIC DEVICE MANUFACTURING CONTROLS: |
|
| QC39-N |
Nonconformance Reporting |
|
| QC40 |
Material/Part Marking Required for Each Item |
|
| QC41 |
MATERIAL REVIEW BOARD (MRB) AUTHORITY GRANTED |
|
| QC41a |
LIMITED MATERIAL REVIEW BOARD (MRB) AUTHORITY GRANTED |
|
| QC42 |
CORRECTIVE ACTION |
|
| QC43 |
Chemical and Material Safety Data Sheet (MSDS) |
|
| QC44 |
USE OF JPL APPROVED SUPPLIER LIST (ASL) |
|
| QC45 |
JPL QUALITY ASSURANCE SITE REPRESENTATIVE ASSIGNMENT |
|
| QC46-N |
JPL Source Inspection |
|
| QC47-N |
GOVERNMENT SOURCE INSPECTION (GSI) |
|
| QC47a |
JPL Mandatory Inspection Points |
|
| QC47b |
PWB Inner Layer And Final Source Inspection (JPL MIP) |
Mar 03, 2009 |
| QC47b-1 |
PWB Inner Layer And Final Source Inspection (JPL MIP) |
|
| QC47c |
Pre-Cap Inspection On Electronic Parts (JPL MIP) |
|
| QC47d |
In-Process Inspection (JPL MIP) |
|
| QC47e |
Final Inspection (JPL MIP) |
|
| QC48 |
JPL Test Witness Source Inspection is Required |
|
| QC49-N |
CALIBRATION SYSTEM REQUIREMENT [NASA AQC09] |
|
| QC50 |
CONTRACTOR INSPECTION REQUIREMENTS (NON-FLIGHT OR NON-CRITICAL GSE HARDWARE) |
|
| QC51 |
NSTS 5300.4 (CURRENT REV.) INSPECTION SYSTEM |
|
| QC52-N |
QUALITY MANAGEMENT SYSTEM [NASA AQC02] |
|
| QC53 |
INSPECTION SYSTEM PLAN |
|
| QC60 |
Submission and Approval of Flowchart(s) |
|
| QC61 |
OXYGEN COMPATIBILITY TESTING |
|
| QC63-N |
Right of Access |
|
| QC64-N |
GIDEP Alert and Problem Advisories |
|
| QC65-N |
Special Process Certification |
|
| QC66 |
HANDLING OF BERYLLIUM |
|
| QC67 |
CONTRACTOR’S RESPONSIBILITY FOR SUPPLYING ELECTROSTATIC DISCHARGE (ESD) PACKAGING AND PERSONAL PROTECTIVE CLEAN ROOM DEVICES |
|
| QC68 |
Workmanship Specification |
|
| QC69-N |
Packaging, Handling & Labeling |
|
| QC70 |
Printed Wiring Boards (PWB) |
|
| QC71 |
Flexible and Rigid-Flexible Printed Wiring Boards |
|
| QC72 |
Quality Management System Per AS9100 |
|
| QC73 |
Quality Management System Per AS9003 |
|
| QC74 |
Quality Management System For Distributors Per AS9120 |
|
| QC75 |
FOD Prevention Program |
|
| QC76 |
NADCAP Accreditation of Special Process Sources |
|
| QC77 |
Electrostatic Discharge (ESD) Protection Program and Packaging per JPL D-1348 |
|
| QC78 |
Quality Management System Per ISO 9001:2000 |
|
| QC79 |
Quality Management System for Distributors or Manufacturers (COTS) |
|
| QC80-S |
USE OF COMMERCIAL OR COTS SOFTWARE AS PART OF CLASS A OR CLASS B SOFTWARE |
Jan 22, 2009 |
| QC81-S |
TECHNICAL AND PROJECT REVIEWS |
|
| QC82 |
SOFTWARE CONFIGURATION MANAGEMENT SYSTEM (LESS THAN ISO 10007) |
Jan 22, 2009 |
| QC83-S |
SYSTEM REQUIREMENTS REVIEW (SRR) DOCUMENTATION |
Jan 22, 2009 |
| QC84-S |
SOFTWARE DEVELOPMENT ENVIRONMENTAL CHANGES |
Jan 22, 2009 |
| QC85-S |
SOFTWARE NONCONFORMANCE REPORTING |
Jan 22, 2009 |
| QC86 |
CORRECTIVE ACTION |
|
| QC87-S |
SOFTWARE TESTING |
Jan 22, 2009 |
| QC88-S |
FLIGHT SOFTWARE MARGINS |
Jan 22, 2009 |
| QC89-S |
PRELIMINARY DESIGN REVIEW (PDR) DOCUMENTATION |
Jan 22, 2009 |
| QC90-S |
SOFTWARE QUALIFICATION TEST (SQT) |
Jan 22, 2009 |
| QC91-S |
CRITICAL DESIGN REVIEW (CDR) DOCUMENTATION |
Jan 22, 2009 |
| QC92-S |
TEST READINESS REVIEW (TRR) DOCUMENTATION |
Jan 22, 2009 |
| QC93-S |
SYSTEM DELIVERY REVIEW (SDR) DOCUMENTATION |
Jan 22, 2009 |
| QC94-S |
SOFTWARE QUALITY ASSURANCE (SQA) |
Jan 22, 2009 |
| QC95-S |
INDEPENDENT VERIFICATION AND VALIDATION (IV&V) |
Jan 22, 2009 |
| QC96-S |
CAPABILITY MATURITY MODEL INTEGRATION (CMMI) |
Jan 22, 2009 |
| QC97-S |
Software Development Programs (ISO 90003:2004): |
Jan 22, 2009 |
| QC98-S |
Software Configuration Control |
Jan 22, 2009 |
| QC99-S |
JPL Software Audits |
Jan 22, 2009 |
